Fluke 6200 - Operating Features; Front Panel Description

6200
Users Manual
4
Operating Features
Front panel description
The connectors, controls and indicators of the tester are
shown and listed below.
1 2
3
4
5 6 7
6200 APPLIANCE TESTER
INSULATION I SUB
BOND ZERO
EARTH BOND
PROBE O NLY WITH
STOPSTOP
MEMMEM
CLEARCLEAR
PRINTPRINT
BOND
200 mA
BOND
25 A
INSUL-
ATION
I
SUB
LOAD /
LEAK
I
TOUCH
IEC
LEAD
ZERO
SWITCH ON APPLIANCE FOR ALL TESTS
IEC
BOND 25A/200mA
TOUC H P RO BE
INSULATION PROBE
CLASS II
PROBE PELV
TEST SOCKET
230V 50Hz / MAX 13A
BOND ZERO
I PE
< 3.5mA
(0.75mA PORTABLE
APPLIANCE)
INSULATI ON I SUB
BOND ZERO
IEC LEAD
EARTH BOND
LOAD / LEAK
IT
OUCH
I
T
OUCH
< 0.25 mA
R
ISO
> 1.0
M Class I R
ISO
> 2.0
M Class II
RPE
< 0.1
R
ISO
> 1.0
M Class I
R PE
200
mA, R
PE
25A
R
PE
< 0.1 + LEAD
PROBE ONLY WITH
CLASS II APPLIANCE
Figure 1. Fluke 6200
No. Description
1 Liquid Crystal Display (LCD).
2 Earthed bar to zero the Earth Bond test lead.
3 Socket to connect IEC lead for IEC Lead test .
4 Serial RS-232 Port to connect the Fluke printer.
5 Socket to connect test lead and crocodile clip for
Earth Bond test.
6 Socket to connect test probe for Insulation test,
Touch Current test, Substitute Leakage test and
PELV test.
7 Socket to connect the appliance to be tested.