701/702
Users Manual
16
Table 3. Key Functions (cont)
ITEM FEATURE DESCRIPTION
11 e key Terminates a numeric entry when setting a source value, or selects entries from lists.
12 q key Toggles between resistance and continuity functions in MEASURE mode, or selects
the resistance function in SOURCE mode.
13 Numeric keypad Used whenever a numeric entry is required.
14 h key Toggles between ac voltage and frequency functions in MEASURE mode, or selects
frequency output in SOURCE mode.
15 v key Selects the dc voltage function in MEASURE mode, or selects dc voltage in SOURCE
mode.
16 o key Turns the power on and off.
To Next Page
Loading...
