Fluke 702 - Page 49

701/702
Users Manual
38
OK
V
RTD
MEASSOURCE
mA mA
RTD
V
300V
MAX
30V MAX
TC
V
RTD
MEASSOURCE
mA mA
RTD
V
300V
MAX
30V MAX
TC
V
RTD
MEASSOURCE
mA mA
RTD
V
300V
MAX
30V MAX
TC
WRONG
8. If necessary, you can change between °C or°F
Temperature Units in s mode as follows:
a. Press s
b. Press the Next Page softkey twice.
c. Use the u and d keys to move the cursor
to the parameter you which to change, then
press e or the Choices softkey to
choose a setting for that parameter.
d. Press u or d to move the cursor to the
desired setting.
e. Press e to go back to the s
display.
f. Press the Done softkey or s to exit s
mode.
9. If necessary, you can change between ITS-90 or
IPTS-68 Temperature Scale in s mode. The
procedure is the same as steps a through f
above.