Fluke 702 - Page 72

Documenting Process Calibrator
Simultaneous Measure/Source
61
Table 8. Simultaneous MEASURE/SOURCE Functions with Loop Power Enabled
MEASURE FUNCTION
SOURCE FUNCTION
dc V mA Freq Ω TC 2W RTD Pressure
dc V • • • • • •
mA • • • • • •
ac V • • • • • •
Frequency (≥20 Hz) • • • • • •
TC • • • • •
Pressure • •• • •
The two softkeys displayed in MEASURE/SOURCE
mode are for use in calibrating a process instrument.
Instructions for calibrating a process instrument are
provided next.
•
As Found, which starts up a calibration routine
to obtain and record as found data.
•
Adjust, for making adjustments to a transmitter if
required.