709/709H
Users Manual
10
Note
Some menus have multiple screens. When this
is the case, the lower-left corner of the menu
shows when additional screens follow the
current screen. is shown when additional
screens precede the current screen. Both icons
are shown when additional screens follow and
precede the present screen.
mA Source
In the mA Source mode, the Product outputs a signal
from 0 mA to 24 mA into a load of up to 1000 Ω (750 Ω if
the internal HART resistor is switched on).
Figure 4 shows the mA Source home screen and typical
connections for this mode.
To Next Page
Loading...
