Fluke 709 - Specifications

Precision Loop Calibrator
Specifications
49
Specifications
Ranges
mA .................................................... 0 mA to 24 mA
Volts .................................................. 0 V dc to 30 V dc
Resolution
mA Ranges ....................................... 1 μA
Voltage Range .................................. 1 mV
Accuracy ................................................ 0.01 % ±2 LSD all ranges (@23 °C ±5 °C)
Stability ................................................... 20 ppm of F.S. /°C from -10 °C to 18 °C and 28 °C to 55 °C
Operating Temp Range .......................... -10 °C to 50 °C (14 °F to 122 °F)
Storage Temp Range ............................. -20 °C to 60 °C (-4.0 °F to 140 °F)
Altitude ................................................... 3000 meters
Ingress Protection Rating ....................... IEC 60529: IP40
Humidity Range ...................................... 10 % to 95 % non-condensing
Display ................................................... 128 x 64 pixels, LCD Graphic with backlight, 8.6 mm high digits
Power ..................................................... Six AAA alkaline batteries
Battery Life (Alkaline Batteries) .............. ≥40 hours continuous use (measure mode)
Loop Compliance Voltage ...................... 24 V dc @ 20 mA
Loop Drive Capability ............................. 1200 Ω without HART resistor, 950 Ω with HART resistor