709/709H
Users Manual
40
Turn the selection knob to step between errors.
1. Push to go to the Function Select menu. A
reminder to change the loop to AUTOMATIC is
shown first.
Configuration Log and Data Log
Configuration Log and Data Log are only available when
connected to a HART device. Use the selection knob to
choose either the Configuration Log or Data Log. See
Figure 42.
gzx51.eps
Figure 42. Data Log and Configuration Log Screen
Configuration Log
Configuration data for a maximum of 20 tags can be
stored for later recall. The configuration data saved is the
same as that shown on the Device Data screen.
The initial Configuration Log screen spans more than one
screen and shows a list of the tags held in storage. If a
storage position is not used, the tag name area shows
<empty>. See Figure 43.
gzx52.eps
Figure 43. Configuration Log Screen
After a storage position is selected, data can be saved or
recalled from it. It can be erased or sent to the USB port.
The data can also be uploaded to a PC with the
709H/TRACK Windows Software.
To Next Page
Loading...
