Fluke 709 - Function Select Menu

Precision Loop Calibrator
HART Device Communication
31
Disconnect from Loop
The Disconnect from Loop screen is shown before the
Product returns to the function home screen so the
Product can be disconnected from the Loop. See
Figure 29 .
gzx38.eps
Figure 29. Disconnect from Loop Screen
Function Select Menu
The Function Select menu is shown in Figure 30.
gzx39.eps
Figure 30. Function Select Menu
The tag name is truncated to fit on one line when
necessary.  flashes in the upper-right corner to show a
live connection.
Use the selection knob to choose the necessary action.
Push  to disconnect from HART mode and go to the
function main screen.