Fluke 8050A - Y8100 DC;Ac Current Probe

ACCESSORIES
PROBE ACCESSORIES
Table 600-1. Probe Accessories Specifications (cont)
83RF
HIGH FREQUENCY PROBE
AC-to-DC Ratio
........................ 1:1
Ratio Accuracy (at 1 MHz and loaded
with 10
MO)
ABOVE 1V . . . . . . . . . . . . . . . . . . . . . . . . . . ±1 dB
BELOW
1V .......................... ±1.5 dB
Frequency Response (Relative to 1 MHz) 100 kHz to 100 MHz± 1 dB
Extended Frequency Response ......... Useful for relative readings from 20 kHz to 250 MHz
Response ............................. Responds to the peak value of an input and is calibrated to read rms
value
of a sine wave
Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 to 30V rms
Maximum Input Voltage . . . . . . . . . . . . . . . . 30V rms, 200V de
Input Capacitance . . . . . . . . . . . . . . . . . . . . . Approximately 3 pF
Temperature Range
OPERATING ........................ +10°C to +35°C
STORAGE ........................... -40°C to +75°C
Humidity .............................. <90% R.H.
Output Connector ..................... Fits standard 0.75-inch dual banana connectors
Accessory ............................. BNC to Probe Adapter, P/N 574756
85RF HIGH FREQUENCY PROBE
AC-to-DC Ratio . . . . . . . . . . . . . . . . . . . . . . . .
1: 1
Ratio Accuracy (At 1
MHz and loaded
with 10 MO)
ABOVE
0.5V . . . . . . . . . . . . . . . . . . . . . . . . . ±0.5 dB
BELOW 0.5V . . . . . . . . . . . . . . . . . . . . . . . . ±1.0 dB
Frequency Response (Relative to 1 MHz) 100 kHz to 100 MHz ±.5 dB
*100 MHz to 200 MHz ±1.0 dB
*200 MHz to 500 MHz ±3.0 dB
*Referred to high and low inputs at probe tip.
Extended Frequency Response ......... Useful for relative readings from 20 kHz to 700 MHz
Response ............................. Responds to the peak value of an input and is calibrated to read rms
value
of a sine wave
Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 to 30V rms
Maximum Input Voltage . . . . . . . . . . . . . . . . 30V rms, 200V de
Input Capacitance ..................... Approximately 3 pF
Temperature Range
OPERATING ........................ +10°C to +35°C
STORAGE ........................... -40°C to +75°C
Humidity .............................. <90% R.H.
Output Connector ..................... Fits standard 0.75-inch dual banana connectors
Accessory ............................. BNC to Probe Adaoter, P/N 574756
Y8100 DC/AC CURRENT PROBE
Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20A ac or de
200A
ac or de
Rated Output .......................... 2V at full range
Accuracy
DC TO 200 HZ . . . . . . . . . . . . . . . . . . . . . . ±2% of range
200 HZ TO 1 KHZ ................... <100A add ±3% reading
>1
OOA add ±6% reading
Calibration Cycle . . . . . . . . . . . . . . . . . . . . . . 1 year
Frequency Response . . . . . . . . . . . . . . . . . . . de to 1.0 kHz
Recommended Load . . . . . . . . . . . . . . . . . . . ~.O kO
Temperature Range .................... +15°C to +35°C; for specified accuracy -10°c to +50°C; storage
and operation at reduced accuracy.
600-7