MicroScanner
2
Features
11
On/off key.
, : Scrolls through screens and changes settings.
In toner mode, these keys cycle through the IntelliTone
and analog toner songs.
: Selects the RJ45 or coaxial connector as the active
port.
: Cycles through the cable test, toner, and PoE
detect modes.
For additional modes, hold down keys while turning the
tester on:
•
+ : Lets you calibrate length measurements
and select meters or feet as the length unit. See
pages 14 and 52.
•
+ : Activates a demonstration mode where
the tester shows examples of test result screens.
Note
Auto shutoff is disabled in demonstration
mode.
•
+ : Displays the version and serial number
screens.
LCD display with backlight.
F-connector for connecting to 75 Ω coaxial cable.
Modular jack for connecting to telephone and twisted
pair network cable. The jack accepts 8-pin modular
(RJ45) and 6-pin modular (RJ11) connectors.
Wiremap adapter with F-connector and 8-pin modular
jack. See page 15.
Optional remote ID locator with F-connector and 8-pin
modular jack. See page 15.
Magnetic hanging strap. Attach and use the strap as
shown.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
