Fluke 192B - 196B/C - 199B/C
Users Manual
94
FlukeView Does Not Recognize The Test Tool
• Make sure that the test tool is turned on.
• Make sure that the interface cable is properly
connected between the test tool and the PC.
• Make sure that the correct COM port has been
selected in FlukeView. If not, change the COM port
setting or connect the interface cable to another COM
port.
Battery Operated Fluke Accessories Do Not
Function
• When using battery operated Fluke accessories,
always first check the battery condition of the
accessory with a Fluke multimeter.
To Next Page
Loading...
