Fluke ScopeMeter 192B - Resetting the Test Tool

Fluke 192B - 196B/C - 199B/C
Users Manual
8
Resetting the Test Tool
If you want to reset the test tool to the factory settings, do
the following:
1 Turn the test tool off.
2 Press and hold the USER key.
3 Press and release.
The test tool turns on, and you should hear a double beep,
indicating the reset was successful.
4 Release the USER key.
Now look at the display; you will see a screen that looks
like Figure 3.
Figure 3. The Screen After Reset