Using The Multimeter
Freezing the Readings
2
31
Freezing the Readings
You can freeze the displayed readings at any time.
1
Freeze the screen. HOLD appears
at the top right of the reading
area.
2
Resume your measurement.
You can use this function to hold accurate readings for
later examination.
Note
For saving screens into memory, see Chapter 6.
Selecting Auto/Manual Ranges
To activate manual ranging, do the following during any
Meter measurement:
1
Activate manual ranging.
2 Increase or decrease the range.
Observe how the bargraph sensitivity changes.
Use manual ranging to set a fixed bargraph sensitivity and
decimal point.
3
Choose auto ranging again.
When in auto ranging, the bargraph sensitivity and decimal
point are automatically adjusted while checking different
signals.
To Next Page
Loading...
