Fluke 192B - 196B/C - 199B/C
Users Manual
4
Safety Information: Read First
Carefully read the following safety information before using
the test tool.
Specific warning and caution statements, where they
apply, appear throughout the manual.
A “Warning” identifies conditions and actions
that pose hazard(s) to the user.
A “Caution” identifies conditions and actions
that may damage the test tool.
The following international symbols are used on the test
tool and in this manual:
See explanation in
manual
Double Insulation
(Protection Class)
Disposal information
Earth ground
Recycling
information
Conformité
Européenne
Safety Approval
Safety Approval
Direct Current
Alternating Current
Warning
To avoid electrical shock or fire:
• Use only the Fluke power supply, Model
BC190 (Battery Charger / Power Adapter).
• Before use check that the selected/indicated
range on the BC190 matches the local line
power voltage and frequency.
• For the BC190/808 universal Battery Charger /
Power Adapter) only use line cords that
comply with the local safety regulations.
Note:
To accomodate connection to various line power
sockets, the BC190/808 universal Battery
Charger / Power Adapter is equipped with a male
plug that must be connected to a line cord
appropriate for local use. Since the adapter is
isolated, the line cord does not need to be
equipped with a terminal for connection to
protective ground. Since line cords with a
protective grounding terminal are more commonly
available you might consider using these anyhow.
To Next Page
Loading...
