Fluke ScopeMeter 192B - Using Average, Persistence and Glitch Capture

Using The Scope
Using Average, Persistence and Glitch Capture
1
15
Using Average, Persistence and Glitch
Capture
Using Average for Smoothing Waveforms
To smooth the waveform, do the following:
1 Display the SCOPE key labels.
2 Open the Waveform Options
menu.
3 Jump to Average:
4 Select On... to open the Average
Factors menu
5 Select Average 64.This averages
the outcomes of 64 acquisitions.
6 Exit the menu.
You can use the average functions to suppress random or
uncorrelated noise in the waveform without loss of
bandwidth. Waveform samples with and without smoothing
are shown in Figure 9.
Figure 9. Smoothing a Waveform