Fluke 192B - 196B/C - 199B/C
Users Manual
68
4
Use RECALL FOR REFERENCE to
recall the saved screen.
5
Resume the measurement. Both,
the reference screen and the
measurement screen will be
displayed.
Recalling a Setup Configuration
To recall the setup configuration from memory 1, do the
following:
1
Display the SAVE/PRINT key labels.
2
Open the Recall menu.
3 Highlight SCREEN+SETUP location 1.
4
Use RECALL SETUP to recall the
saved setup.
Observe that RUN appears at the top right of the screen.
From this point you continue in the new operating
configuration.
To Next Page
Loading...
