Focus MX-4 - Other Useful Information; Aborting a Playback Session

LEARN MODE OTHER USEFUL INFORMATION
103
OTHER USEFUL INFORMATION
When the MX-4 comes to the end of a Learned Script, it stops. You can re-initiate the same or any
other Learned Script by entering
SHIFT+LEARN+<LEARNED SCRIPT #> for the script you want to
run.
You can do the following in a Learned Script:
• Perform transitions, including use of Reverse and Speed settings.
• Choose CURRENT and NEXT sources.
• Use the Freeze function.
• Transition audio, video, or both.
You cannot do the following in a Learned Script:
• Create or transition to Compose screens.
•Use Chroma Key.
•Use the Demo.
•Use PIPs.
The MX-4 memorizes a manual transition (such as when using the
T-BAR) as an automatic transi-
tion at the currently set speed — that is, it is remembered as if you had used the
PLAY button rather
than the
T-BAR.
The MX-4 erases a Learned Script when you overwrite an existing Learned Script.
ABORTING A PLAYBACK SESSION
Once the MX-4 begins playing back a Learned Script, you can abort the playback session by press-
ing
LEARN.
Once you end playback of a Learned Script, the
PLAY button and T-BAR act normally, playing the
effect indicated on the screen rather than the Learned Script.