Focusrite Rednet R1 - Performance and Specifications; Headphone and Digital Performance; Connectivity, Dimensions, and Power

23
PERFORMANCE AND SPECIFICATIONS
Digital Performance
Supported sample rates 44.1 / 48 / 88.2 / 96 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit
Clock Sources Internal or from Dante Network Master
Connectivity
Rear Panel
Headphone 1/4” stereo Jack socket
Footswitch
1/4” mono Jack socket
Network
RJ45 connector
PSU (PoE and DC)
1 x PoE (Network Port 1) Input and 1 x DC 12V Locking Barrel Input Connector
Headphone Output
All measurements taken at +19dBm reference level, maximum gain, R
L
= 600Ω
0 dBFS Reference Level +19 dBm, ±0.3 dB
Frequency Response 20 Hz – 20 kHz ±0.2 dB
THD + N -104 dB (<0.0006%) at -1 dBFS
Dynamic Range 119 dB ‘A’-weighted (typical), 20 Hz - 20 kHz
Output Impedance 5Ω
Headphone Impedance 32Ω – 600Ω
Power
Power over Ethernet
(PoE)
Complies with IEEE 802.3af class 0 Power-over-Ethernet standard
PoE A or PoE B compatible.
DC Power Supply
1 x 12 V 1.2 A DC power supply
Consumption
PoE: 10.3 W; DC: 9 W when using supplied DC PSU
Dimensions
Height (Chassis Only) 47.5mm / 1.87”
Width 140mm / 5.51”
Depth (Chassis Only) 104mm / 4.09”
Weight
Weight
1.04 kg