Folger Tech FT-5 - Assemble Bed Plate

FT-5 User Manual Page 26
5) ASSEMBLE BED PLATE
In this section, the bed panel will be assembled.
You will need:
Item ID
Quantity
Description
FT16
1
Bed Plate
11
4
LM8FLUU
13
2
T8 Leadscrew Nut
H
24
M3x16mm Screw
A
24
M3 Nylock
1. Insert two of the LM8FLUU into the outer
holes. Secure them in place four M3x 16mm
screw and four M3 Nylock. Insert T8
Leadscrew nut into the center holes and
secure it in place using four M3x16mm Screws
and four M3 Nylocks.
2. Repeat this step for the other side of the hot
bed plate.