5. Repeat the steps to remove the
passenger side panel front roof panel.
6. Store the front roof panels in the
storage bag. See Storing the Roof
Panels (page 366). See Storing the
Doors and the Roof Panels (page
360).
7. To install, reverse the removal
procedure.
REMOVING AND INSTALLING THE
CENTER ROOF PANEL - 4-DOOR
Remove both of the front roof panels
before removing the center roof panel.
1. Turn the three L-shaped latches on the
center roof panel, unlocking them from
the rear roof panel.
2. Unlatch the driver side and passenger
side latches of the center roof panel.
3. Remove the center roof panel.
4. To install, reverse the removal
procedure.
REMOVING AND INSTALLING THE
REAR ROOF PANEL - 2-DOOR
Remove the front panels before removing
the rear roof panel.
1. Open the rear doors.
2. Open the tailgate window. See
Opening and Closing the Windows
(page 103).
3. Locate the wire harness and washer
hose on the driver side rear inside
corner of the vehicle.
4. Release the locking tab by pushing it
down.
5. Push the tab inward when pulling down
to disconnect and remove the wiring
harness.
6. Push the release button on the hose
connector and pull down to remove
the washer hose.
351
2022 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Removable Vehicle Components
To Next Page
Loading...
