8. Remove the cable securing clips from
the cover. Release the retaining clips
and remove the cover.
9. Disconnect the battery.
Installing the Battery
WARNING
Make sure that you securely fasten
the seat runner bolts before installing
the covers.
Install in the reverse order.
CHECKING THE WIPER
BLADES
Run the tip of your fingers over the edge of
the blade to check for roughness.
Clean the wiper blades with washer fluid
or water applied with a soft sponge or
cloth.
CHANGING THE WIPER
BLADES
Windshield Wiper Blades
Note: The windshield wiper blades are
different in length. See Technical
Specifications (page 161). If you install
wiper blades of the wrong length, the rain
sensor may not work correctly.
Changing the Windshield Wiper Blades
Lift the wiper arms.
1. Press the locking button.
152
Tourneo Custom/Transit Custom (TTF)
Maintenance
To Next Page
Loading...
Need help?
General
