EasyManua.ls Logo

Ford Transit - Jump Starting the Vehicle; To Connect the Booster Cables

Ford Transit
314 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4. Press the brake pedal, and then press
and hold the button until the engine
starts.
Note: Various system checks are
automatically carried out before the vehicle
will restart. if your vehicle fails to restart
after the third attempt, the system has
detected a fault that requires service. We
recommend you contact an authorized
dealer.
JUMP STARTING THE VEHICLE
WARNINGS
Do not use fuel lines, engine rocker
covers or the intake manifold as
grounding points.
Connect batteries with only the same
nominal voltage.
Always use booster cables with
insulated clamps and adequate size
cable.
Note: Do not disconnect the battery.
To Connect the Booster Cables
Flat battery vehicleA
Booster battery vehicleB
Positive connection cable1
Negative connection cable2
1. Position the vehicles so that they do
not touch one another.
2. Switch the ignition off and any
electrical equipment.
141
Transit (TTG) Vehicles Built From: 19-06-2014, Vehicles Built Up To: 31-12-2014, EK3J-19A321-AKA (CG3612en) enGBR, Edition date: 04/2014, First Printing
Roadside Emergencies

Table of Contents

Other manuals for Ford Transit

Related product manuals