Using virtual domains Configuring global and VDOM resource limits
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424 117
http://docs.fortinet.com/ • Feedback
VDOM resource limits
You can configure VDOM resource limits when you create a new VDOM or edit an existing
VDOM. These resource limits are restricted by the FortiGate global limits in that the total
of each resource across all VDOMs cannot exceed the global limit.
You can optionally set a guaranteed minimum level of resources that will be available to
the VDOM. This will ensure that other VDOMs do not use all of an available resource.
To configure VDOM resource limits
1 Go to System > VDOM.
2 Select Create New, enter a name and then select OK, or select the Edit icon of an
existing VDOM.
3 Modify the values described in the table below as required.
4 Select OK.
Figure 50: Configuring VDOM resource limits
Note: The resource limits vary for different FortiGate models. The resource limits are
increased when two or more FortiGates are in HA mode due to the increased resources
that are available to the HA cluster.
Resource Description of the resource.
Maximum Enter the maximum amount of the resource allowed for this VDOM. This amount
might not be available due to usage of this resource type by other VDOMs.
Guaranteed Enter the minimum amount of the resource available to this VDOM regardless of
usage by other VDOMs.
Current The amount of the resource that this VDOM currently uses.
To Next Page
Loading...