Fortinet Gate 60D - Category Block CLI Configuration

Web Filter FortiGuard - Web Filter
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424 493
http://docs.fortinet.com/ • Feedback
Figure 323: New Local Rating
Category block CLI configuration
Use the hostname keyword for the webfilter fortiguard command to change the
default host name (URL) for the FortiGuard Web Filtering Service Point. The FortiGuard
Web Filtering Service Point name cannot be changed using the web-based manager.
Configure all FortiGuard Web Filtering settings using the CLI. For more information, see
the FortiGate CLI Reference for descriptions of the webfilter fortiguard keywords.
URL Enter the URL to be rated.
Category Name Select the blue arrow to expand the category.
Enable Filter Select to enable the filter for the category or the individual sub-category.
Classification Name The classifications that can be filtered.
Enable Filter Select to enable the classification filter.