Antispam IP address and email address black/white lists
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424 503
http://docs.fortinet.com/ • Feedback
Adding an antispam IP address
After creating an IP address list, you can add IP addresses to the list.
Enter an IP address or a pair of IP address and mask in the following formats:
• x.x.x.x, for example, 192.168.69.100.
• x.x.x.x/x.x.x.x, for example, 192.168.69.100/255.255.255.0
• x.x.x.x/x, for example, 192.168.69.100/24
To add an IP address go to UTM > AntiSpam > IP Address. For the IP address list name
to which you want to add an IP address, select Edit. Then select Create New.
Figure 330: Adding an antispam IP address
Viewing the antispam email address list catalog
You can add a maximum of two antispam email address lists and then select the best one
for each protection profile. To view the antispam email address list catalog, go to UTM >
AntiSpam > E-mail Address. To view any individual antispam email address list, select the
Edit icon for the list you want to see.
Figure 331: Sample antispam email address list catalog
Delete icon Remove the address from the list.
Edit icon Edit address information.
Move To icon Select to move the entry to a different position in the list.
The firewall policy executes the list from top to bottom. For example, if you
have IP address 192.168.100.1 listed as spam and 192.168.100.2 listed as
clear, you must put 192.168.100.1 above 192.168.100.2 for 192.168.100.1 to
take effect.
IP Address/Mask Enter the IP address or the IP address/mask pair.
Action Select: Mark as Spam to apply the spam action configured in the protection
profile, Mark as Clear to bypass this and remaining spam filters, or Mark as
Reject (SMTP or SMTPS) to drop the session.
Enable Select to enable the address.
Create New Create a new antispam address list.
Name Antispam email address lists.
# Entries The number of entries in each antispam email address list.
To Next Page
Loading...