Settings System Admin
FortiGate Version 4.0 Administration Guide
228 01-400-89802-20090424
http://docs.fortinet.com/ • Feedback
Settings
The Settings tab includes the following features that you can configure:
• ports for HTTP/HTTPS administrative access and SSL VPN login
• the idle timeout setting
• settings for the language of the web-based manager and the number of lines displayed
in generated reports
• PIN protection for LCD and control buttons (LCD-equipped models only)
• SCP capability for users logged in via SSH
• IPv6 support on the web based manager.
To configure settings, go to System > Admin > Settings, enter or select the following and
select OK.
Figure 118: Administrators Settings
Web Administration Ports
HTTP TCP port to be used for administrative HTTP access. The default is
80.
HTTPS TCP port to be used for administrative HTTPS access. The default is
443.
SSLVPN Login Port An alternative HTTPS port number for remote client web browsers to
connect to the FortiGate unit. The default port number is 10443.
Telnet Port TCP port to be used for administrative telnet access. The default is 23.
To Next Page
Loading...