IPSec VPN Monitoring VPNs
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424 545
http://docs.fortinet.com/ • Feedback
To define a concentrator, go to VPN > IPSEC > Concentrator. For detailed information and
step-by-step procedures about how to set up a hub-and-spoke configuration, see the
FortiGate IPSec VPN User Guide.
Figure 357: Concentrator list
Defining concentrator options
A concentrator configuration specifies which spokes to include in an IPSec hub-and-spoke
configuration.
To specify the spokes of an IPSec hub-and-spoke configuration, go to VPN > IPSEC >
Concentrator and select Create New.
Figure 358: New VPN Concentrator
Monitoring VPNs
To view active VPN tunnels, go to User > Monitor > IPSEC. For more information, see
“IPSEC monitor list” on page 592.
Create New Define a new concentrator for an IPSec hub-and-spoke configuration. For
more information, see “Defining concentrator options” on page 545.
Concentrator Name The names of existing IPSec VPN concentrators.
Members The tunnels that are associated with the concentrators.
Delete and Edit
icons
Delete or edit a concentrator.
Concentrator Name Type a name for the concentrator.
Available Tunnels A list of defined IPSec VPN tunnels. Select a tunnel from the list and then
select the right arrow. Repeat these steps until all of the tunnels associated
with the spokes are included in the concentrator.
Members A list of tunnels that are members of the concentrator. To remove a tunnel
from the concentrator, select the tunnel and select the left arrow.
To Next Page
Loading...