Fortinet Gate 60D - Adding or Editing a Rule in a DLP Sensor

Data Leak Prevention DLP Sensors
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424 513
http://docs.fortinet.com/ • Feedback
Figure 338: List of rules in a DLP sensor
Adding or editing a rule in a DLP sensor
To add or edit a rule in a DLP sensor go to UTM > Data Leak Prevention > Sensor and
select the Edit icon of the sensor to be configured. To add a DLP rule to a sensor, select
Create New. To edit a rule already included in the sensor, select the edit icon of the sensor
you want to edit.
Figure 339: Adding a DLP rule to a DLP sensor
Name The DLP sensor name.
Comment The optional description of the DLP sensor.
Create New Select Create New to add a new rule or compound rule to the sensor.
Enable You can disable a rule or compound rule by clearing this check box.
The item will be listed as part of the sensor, but it will not be used.
Rule name The names of the rules and compound rules included in the sensor.
Action The action configured for each rule. If the selected action is None, no
action will be listed.
Although archiving is enabled independent of the action, the Archive
designation will appear with the selected action.
For example, if you select the Block action and enable Archive for a
rule, the action displayed in the sensor rule list is Block, Archive.
Comment The optional description of the rule or compound rule.
Delete and Edit icons Delete or edit a rule or compound rule.