EasyManua.ls Logo

Fortinet Gate 60D - Viewing Address Leases; Reserving IP Addresses for Specific Clients

Fortinet Gate 60D
706 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System DHCP Viewing address leases
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424 175
http://docs.fortinet.com/Feedback
Viewing address leases
Go to System > DHCP > Address Leases to view the IP addresses that the DHCP servers
have assigned and the corresponding client MAC addresses.
Figure 92: Address leases list
Reserving IP addresses for specific clients
You can reserve an IP address for a specific client identified by the client device MAC
address and the connection type, regular Ethernet or IPSec. The DHCP server always
assigns the reserved address to that client. You can assign up to 200 IP addresses as
reserved. For more information see the FortiGate Maximum Values for FortiOS 3.0 article
on the Fortinet Knowledge Center.
Use the CLI config system dhcp reserved-address command. For more
information, see the FortiGate CLI Reference.
DNS Server 1
DNS Server 2
DNS Server 3
Enter the IP addresses of up to 3 DNS servers that the DHCP server assigns
to DHCP clients.
WINS Server 1
WINS Server 2
Add the IP addresses of one or two WINS servers that the DHCP server
assigns to DHCP clients.
Option 1
Option 2
Option 3
Enter up to three custom DHCP options that can be sent by the DHCP
server. Code is the DHCP option code in the range 1 to 255. Option is an
even number of hexadecimal characters and is not required for some option
codes. For detailed information about DHCP options, see RFC 2132, DHCP
Options and BOOTP Vendor Extensions.
Exclude Ranges
Add Add an range of IP addresses to exclude.
You can add up to 16 exclude ranges of IP addresses that the DHCP server
cannot assign to DHCP clients. No range can exceed 65536 IP addresses.
Starting IP Enter the first IP address of the exclude range.
End IP Enter the last IP address of the exclude range.
Delete icon Delete the exclude range.
Interface Select interface for which to list leases.
Refresh Select Refresh to update Address leases list.
IP The assigned IP address.
MAC The MAC address of the device to which the IP address is assigned.
Expire Expiry date and time of the DHCP lease.

Table of Contents