Customizing the display of log messages Log&Report
FortiGate Version 4.0 Administration Guide
666 01-400-89802-20090424
http://docs.fortinet.com/ • Feedback
Filtering is also another way to customize the display of log messages. By using the filter
icon, you can display specific information of log messages. For example, you may want to
display only event log messages that have a severity level of alert.
Column settings
By using Column Settings, you can customize the view of log messages in Formatted
view. By adding columns, changing their order, or removing them, you can view only the
log information you want.
The Column Settings feature is available only in Formatted view.
Figure 436: Column settings for viewing log messages
To customize the columns
1 Go to Log&Report > Log Access.
2 Select the tab to view logs from, Memory, Disk or Remote.
3 Select a log type from the Log Type list.
4 Select the View icon if you are viewing a log file on a FortiAnalyzer unit.
5 Select the Column Settings icon.
6 Select a column name in the Available fields list and then select one of the following to
change the views of the log information:
7 Select OK.
Note: For more information about filtering log messages, see “Adding filters to web-based
manager lists” on page 53.
-> Select the right arrow to move selected fields from the Available fields list to
the Show these fields in this order list.
<- Select the left arrow to move selected fields from the Show these fields in this
order list to the “Available fields” list.
Move up Move the selected field up one position in the Show these fields in this order
list.
Move down Move the selected field down one position in the Show these fields in this
order list.
To Next Page
Loading...