System Admin Administrators
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424 217
http://docs.fortinet.com/ • Feedback
Figure 111: Example LDAP server list
To configure an LDAP server
1 Go to User > Remote > LDAP.
2 Select Create New or select the Edit icon beside an existing LDAP server.
3 Enter or select the following and select OK.
Create New Add a new LDAP server.
Name The name that identifies the LDAP server on the FortiGate unit.
Server Name/IP The domain name or IP address of the LDAP server.
Port The TCP port used to communicate with the LDAP server.
Common Name Identifier The common name identifier for the LDAP server.
Distinguished Name The distinguished name used to look up entries on the LDAP server.
Delete icon Delete the LDAP server configuration.
Edit icon Edit the LDAP server configuration.
Name The name that identifies the LDAP server on the FortiGate unit.
Server Name/IP The domain name or IP address of the LDAP server.
Server Port The TCP port used to communicate with the LDAP server.
Common Name
Identifier
The common name identifier for the LDAP server.
Distinguished Name The base distinguished name for the server in the correct X.500 or
LDAP format.
Query icon View the LDAP server Distinguished Name Query tree for the LDAP
server that you are configuring so that you can cross-reference to the
Distinguished Name.
For more information, see “Using Query” on page 577.
Bind Type The type of binding for LDAP authentication.
Anonymous Bind using anonymous user search.
Regular Bind using a user name/password and then search.
Simple Bind using a simple password authentication without a search.
Filter Filter used for group searching. Available only if Bind Type is
Anonymous or Regular.
User DN Distinguished name of user to be authenticated. Available only if Bind
Type is Regular.
Password Password of user to be authenticated. Available only if Bind Type is
Regular.
Secure Connection A check box that enables a secure LDAP server connection for
authentication.
To Next Page
Loading...