Application Control Application control statistics
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424 529
http://docs.fortinet.com/ • Feedback
P2P Usage For each P2P protocol, the following usage information is listed:
• Total Bytes (transferred)
• Average Bandwidth.
If the action for a P2P application is set to pass, the statistics will
display the total usage of the P2P application. Applications set to
Block will not affect the statistics.
Note that the same application can have different actions set in
different application control lists. In this case, the traffic handled by the
lists with the Pass action will be reflected in the statistics. The traffic
handled by the lists with the Block action will not be reflected.
VoIP Usage For SIP and SCCP protocol, the following information is listed:
• Active Sessions (phones connected, etc)
• Total Calls (since last reset)
• Calls Failed/Dropped
• Calls Succeeded
To Next Page
Loading...