PPTP configuration using CLI commands PPTP VPN
FortiGate Version 4.0 Administration Guide
550 01-400-89802-20090424
http://docs.fortinet.com/ • Feedback
ip-mode
{range | usrgrp}
Enable to have the PPTP client retrieve the IP
address from the PPTP user group or select an IP
address from the pre-configured IP address range.
local-ip
<address_localip>
PPTP server IP address from the PPTP user group.
sip <address_ipv4> The starting address of the PPTP IP address range. 0.0.0.0
status
{disable | enable}
Enable or disable PPTP VPN. disable
usrgrp <group_name> This keyword is available when status is set to
enable.
Enter the name of the user group for authenticating
PPTP clients. The user group must be added to the
FortiGate configuration before it can be specified
here.
Null.
eip <address_ipv4> The ending address of the PPTP address range. 0.0.0.0
ip-mode
{range | usrgrp}
Enable to have the PPTP client retrieve the IP
address from the PPTP user group or select an IP
address from the pre-configured IP address range.
To Next Page
Loading...