SSL VPN Default web portal configurations
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424 565
http://docs.fortinet.com/ • Feedback
End IP Enter the ending IP address for the split tunnel range.
Connect Initiate a session and establish an SSL VPN tunnel with the FortiGate
unit.
Disconnect End the session and close the tunnel to the FortiGate unit.
Refresh now Refresh the Fortinet SSL VPN Client page (web portal).
Link status Indicates the state of the SSL VPN tunnel:
Up is displayed when an SSL VPN tunnel with the FortiGate unit has
been established.
Down is displayed when a tunnel connection has not been initiated.
Bytes sent: Displays the number of bytes of data transmitted from the client to the
FortiGate unit since the tunnel was established.
Bytes received: The number of bytes of data received by the client from the FortiGate
unit since the tunnel was established.
<status information> Displays detailed information about the tunnel connection (for
example, “Fortinet SSL VPN client connected to server”.)
To Next Page
Loading...