System Status Status page
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424 75
http://docs.fortinet.com/ • Feedback
Figure 35: Top sessions bar graph showing destination IP addresses
The Top Sessions display is not part of the default dashboard display. It can be displayed
by selecting Add Content > Top Sessions.
To view detailed information about all displayed sessions at once, select Details. This
changes the Top Sessions display to a table format, without opening a new window. To
return to the chart display, select Return. The table displays more detailed information
about sessions than the chart display, including:
• the session protocol such as tcp or udp
• source address and port
• destination address and port
• the ID of the policy, if any, that applies to the session
• how long until the session expires
• which virtual domain the session belongs to
To view detailed information about a single session bar in the chart, click on the bar. The
display will change to the table format, with the filters set to only show the selected
information.
Selecting edit for Top Sessions allows changes to the:
• refresh interval
• sort criteria to change between source and destination addresses of the sessions
• number of top sessions to show
Note: Rebooting the FortiGate unit will reset the Top Session statistics to zero.
Sort Criteria
Number of
active
sessions
Criteria of Top Sessions
(Source IP Address)
Number of
sessions displayed
Last updated
Change to a detailed table view
To Next Page
Loading...