10
Test the Accessories
Before installing or mounting the accessories, it’s a good
idea to test each one to make sure they’re all working. You
can arm the system, trigger an accessory, and conrm that
the alarm triggers and reports the Zone number to you.
ere are more details about how to trigger the accessories
in the Accessories section of this user manual.
We also recommend creating a schedule and regularly test-
ing your accessories (once every 3 months, for example).
If anything is not working correctly, you can refer to the
Troubleshooting section of the manual for some steps to
try. You can also contact Fortress Customer Support for
further assistance (see page 33). All Fortress equipment
comes with a 3-year hardware warranty!
Install the Equipment
Your system comes with adhesive tape and mounting hard-
ware for mounting each piece of the system. Here are some
recommendations that can help you decide how and where
to install the equipment.
• Mount on clean, flat, dry surfaces
• 150 feet wireless range (433 MHz radio signal)
• Concrete or brick walls can block the signal
• Avoid mounting directly on metal (spacers recommended)
• Main panel in central / hidden location
• Motion detectors not pointing outside (avoid false alarms)
Check our web site for installation videos! You can also
nd more details in the Working With Accessories section.
To Next Page
Loading...
