Fortress Technologies S03 User Manual

12
Change Your Password
e default password for the S03 Security System is 1234.
To set a new password, enter Programming Mode (page 7),
then...
1 0 * [New 4-digit password] #
en you can press # again to exit Programming Mode.
Change Optional Settings
e last step in setting up your system for the rst time is
to adjust any optional settings, such as enabling an Entry
Delay, recording a custom voice message, and more. e
instructions for changing these settings can be found in
the next sections of this user manual.

Fortress Technologies S03 Specifications

General

Brand	Fortress Technologies
Model	S03
Category	Security System
Language	English