EasyManua.ls Logo

Fortress Technologies S03 - Siren Time and Silent Alarm; Siren Chirp Options; Door Chime Feature

Fortress Technologies S03
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
Siren Time / Silent Alarm
You can adjust how long the Internal Wired Siren will
sound for when the alarm is triggered, from 0 to 30 min-
utes (default 1 minute). If this is set to 0, all sirens will be o
and the alarm will be silent. If not silent, the wireless sirens
have a timeout of 1 minute, and those cannot be adjusted.
To change the Siren Time, enter Programming Mode (page
7), then...
29 * [2-digit number] #
Siren Chirp
By default when the system is armed or disarmed, there
will be a short blast, or “chirp,” from the sirens. You can
toggle this setting on or o.
To toggle the Siren Chirp, enter Programming Mode (page
7), then...
Enable: 8 #
Disable: 8 *
Door Chime
Each Zone can be set to have an optional Door Chime.
When the Door Chime feature is enabled, then whenev-
er the system is disarmed and a sensor is triggered (such as
opening a door), then the main panel will beep 3 times.

Related product manuals