27
Programming the Keypad to the Main Panel
e main panel considers the RFID Keypad to be the same
as a Remote Key Fob, so we can add it to one of the Zones
typically used for Remotes like 30, 31, or 32. You can refer
to the Remote Key Fobs section for more information.
When ready, the way to trigger the RFID Keypad is to type
in the 6-digit Admin Password, then press SOS.
Using the RFID Keypad
Press any key to wake up the RFID Keypad.
To send an Arm command to the main panel:
[4-Digit User Password], then the Arm button (either the
Lock icon for Away, or the House icon for Home).
To send a Disarm command to the main panel:
[4-Digit User Password], then the Disarm button
(or swipe an RFID Key Tag in front of the Keypad.)
Wireless Sirens
e S03 Security System works with one or more wireless si-
rens that can be placed anywhere within range of the panel
(150 feet). Like the other accessories, sirens that come with
your new system are pre-programmed by our technicians
so they should be working right out of the box.
If you purchase additional sirens at a later date, you can
easily add them to your system by following the steps in
this section.
To Next Page
Loading...
Need help?
General
