34
Removing All Accessories
When removing accessories from the S03 system, all acces-
sories are removed at the same time. If you want to remove
one or more accesssories, then you will need to remove all
accessories and then reprogram the ones you wish to con-
tinue using. is includes all sensors and detectors, wire-
less sirens, remote key fobs, smart oulets, and RFID key
tags.
Other settings in the panel (such as your password, de-
lay settings, chime settings, and etc.) will not be forgotten
when you remove all accessories.
To remove all accessories from your S03 main panel, enter
Programming Mode (page 7), then...
0 7 #
[your 4-digit password] #
Unlike other commands in the S03 system, you’ll notice
that you will need to enter your password again aer enter-
ing the “0 7 #.” is helps to prevent the accidental removal
of all of the accessories when you don’t intend to do so.
To Next Page
Loading...
