Fortress Technologies S03 - Page 38

33
Controlling over the phone
Aer calling the system and entering your password, you
can turn a Smart Outlet on or o with these commands:
• Turn On:
[2-digit outlet number] 1
• Turn O:
[2-digit outlet number] 0
Programming a Smart Outlet
Like other accessories, any Smart Outlets you have pur-
chased with a new system will be pre-programmed to the
panel. You can add additional Smart Outlets later by fol-
lowing these steps:
1. Plug in the Smart Outlet to power.
2. Press and hold the button on the Smart Outlet. The red light
will turn off.
3. On the main panel, enter the following:
* [2-digit outlet number] #
The light on the Smart Outlet will flash red twice.
4. Press and release the button on the Smart Outlet. The light
will turn blue.
De-Programming a Smart Outlet
You can de-program a Smart Outlet by following these
steps:
1. Plug in the Smart Outlet to power.
2. Press and hold the button on the Smart Outlet. The red light
will turn off.
3. Press and hold the button on the Smart Outlet again for
about 10 seconds. The red light will flash faster and faster,
and then you’ll see a solid blue light.
4. Unplug the Smart Outlet from the power.