Foscam Huntvision - Page 32

29
Step 7: Verify the P2P feature of the camera is enable; Login to the camera via a web browser on a computer
connected to the same LAN. Navigate to Sengs > Network > P2P and verify the feature is enabled;
Step 8: Lower the bit rate and frame rate of the live video feed from the camera;
● How do I fix the error “please re-login aer plugin installed”?
a). Internet Explorer (Windows OS)
Step 1: Launch Internet Explorer, and navigate to Tool > Internet Opons > Security > Customer Level
> AcveX Controls and Plugins;
Step 2: Enable ‘Download unsigned AcveX controls’, ‘Inialize and script AcveX controls’, ‘Run
AcveX controls and plugins’;
Step 3: Close and re-launch Internet Explorer and aempt to login to the camera.
b). Safari (Mac OS)
c). Chrome (Windows OS)
NOTE: If you've turned on AcveX Filtering, please find the buon in the address bar and click turn it off so the
plugin can run.
Step 1: Open Safari and navigate to Security Sengs > Internet Plug-Ins opons;
Step 2: Enable Allow Plug-Ins;
Step 3: Close Safari completely and re-launch the browser and aempt to login to the camera.
Launch the browser and in the address bar type the address ‘chrome://components’, then find pnacl
located in the list; If the version number indicated is 0.0.0.0 the component has not been updated.
Click on Check for Update to update the pnacl component and restart the browser aer the update is
complete. If the problem connues aer the pnacl plugin is updated temporarily, disable the an-virus