• Turn counter clock-wise the knob at the
bottom up to the complete unlock of the
piston. .
• Remove the piston assy by unscrewing the
steel pin and pulling the piston from the knob
and from the bottom.
• Remove the Orings from the bottom, from the
piston and from the slot of the exhaust duct
using the appropriate tool (supplied)
• Unlcok the tap by unscrewing the nut A and
the safety nut B, then pull to remove the tap
body fom the threaded pin
All the disassembled parts must remain soaking in the Ecolab P3 Topax-san sanitizer (4%
dilution) for at least 15’ before they are rinsed with plenty of cold drinking water.
To Next Page
Loading...
