SANITISING FIXED PARTS
While the removable parts soak in the sanitizer
inside the tub, proceed sanitising the fixed parts of
the machine:
SANITISING THE TUB
• Immerse a disposable paper cloth in the sanitising
liquid.
• Pass the cloth over all the surfaces of the tub and
fixed transmission shaft.
• Pass the cloth over the outer edge of the tub until
reaching the surfaces of the cap and front panel.
• Use the brush previously emerged in the sanitizer
to thoroughly clean the drain duct which connects
the tank to the tap.
- Never use any type of solvents and/or thinners to preserve the plastic parts and
gaskets during washing.
- Chemical sanitising products must be used in compliance with standards in force and
with the utmost caution.
- During sanitising operations, do not touch parts with tissues, sponges, rags or any
other non-sterile material.
To Next Page
Loading...
