Fritz! Box 6490 cable - Page 103

Fax Function
FRITZ!Box 6490 Cable 103
Configuring Automatic Fax Detection
Here is how automatic fax detection works:
The answering machine checks each incoming call to see
whether it is a telephone call or a fax. Callers can leave a mes-
sage, and faxes are forwarded to the fax function.
Here is how to enable automatic fax detection:
1. Open the FRITZ!Box user interface; see page 25.
2. Configure the fax function; see page 102.
3. Select “Telephony / Telephony Devices”.
4. Click the “Edit” button to open the settings of the fax
function:
5. Click the “Help” button.
The Help on the fax function contains instructions on
how to set up automatic fax detection.
Sending Faxes from the User Interface
1. Configure the fax function. For instructions, see
Configuring the Fax Function on page 102.
2. Open the FRITZ!Box user interface; see page 25.
3. Select “Telephony / Fax”.
4. Select the recipient’s name and fax number from the
telephone book and enter the data in the “to” and “Fax
number” fields.
5. You can enter your name and address in the “Sender”
field.
6. Select a fax number from the “Send with” list. The list
contains all telephone numbers assigned to the fax func-
tion.
7. Enter a subject and the text of your fax.