Fritz! Box 6490 cable - Alarm; 15.10 Baby Monitor

FRITZ!Box 6490 Cable 108
Alarm
15.9 Alarm
When you configure an alarm, your telephone rings at the
specified time.
Configuring the Alarm
1. Open the FRITZ!Box user interface; see page 25.
2. Select “Telephony / Alarm”.
3. Enable the alarm and enter a time.
4. Select which telephone should ring at the specified
time.
5. Define here whether the alarm should be repeated.
6. Click “Apply” to save the settings.
The alarm is configured and enabled.
15.10 Baby Monitor
The following telephones can be configured as a baby moni-
tor:
• FRITZ!Fon cordless telephones
• Telephones connected to the “FON 1” or “FON 2” on the
FRITZ!Box.
When a telephone is configured as a baby monitor, it calls a
previously specified telephone number automatically when-
ever the volume in the room reaches a defined level.
Configuring a FRITZ!Fon Cordless Telephone as a Baby
Monitor
1. Press the menu key on your FRITZ!Fon.
2. Select “Suppl. services” and then press “OK”.
3. Select “Baby monitor” and then press “OK”.
4. Select “Destination no.” and then press “OK”.