FRITZ!Box 6490 Cable 34
Saving and Restoring the FRITZ!Box Settings
Restoring Settings
With the “Restore” function in the “System / Backup” you can
have all settings from a backup file you created with this or
another FRITZ!Box loaded in full to your FRITZ!Box. Your cur-
rent FRITZ!Box settings will be overwritten by this function.
You can use the following backup files to restore settings:
• Backup files created with the same FRITZ!Box.
If you apply settings from a backup file created with the
same FRITZ!Box, all settings will be restored in full.
• Backup files created with a different FRITZ!Box of the
same model.
If you apply settings from a backup file that was created
with a different FRITZ!Box of the same model, then you
can restore all settings if the backup file was protected
with a password.
• Backup files created with a different FRITZ!Box model.
If you apply settings from a backup file that was created
with a FRITZ!Box of a different model, then you can re-
store several selected settings to your FRITZ!Box.
A wizard is available in the FRITZ!Box user interface to assist
you in restoring your FRITZ!Box settings, guiding you through
the process step by step.
1. Open the FRITZ!Box user interface; see page 25.
2. On the “Overview” page, select the “Wizards” menu.
3. Start the “Save and Restore Settings” Wizard.
4. In the next window, select the “Restore settings” op-
tions and then click “Next”.
The wizard guides you through the menus and dialogs to re-
store your settings.
Your current FRITZ!Box settings will be overwritten by
the settings in the backup file.
To Next Page
Loading...
