Fritz! Box 6490 cable - Fax Function

FRITZ!Box 6490 Cable 102
Fax Function
15.4 Fax Function
With the FRITZ!Box you can send and receive faxes without a fax ma-
chine. The FRITZ!Box can be configured to forward received faxes by
e-mail.
Configuring the Fax Function
1. Open the FRITZ!Box user interface; see page 25.
2. Select “Telephony / Telephony Devices”.
3. Click “Configure New Device”.
4. Under “Integrated in the FRITZ!Box”, select the “Fax
function” option and confirm by clicking “Next”.
5. Enter the fax ID in the following format:
+49 30 12345 (country code, area code without 0, your
fax number)
6. Define whether the FRITZ!Box forwards incoming faxes
by e-mail or saves them.
You can also enter multiple e-mail addresses. Use a
comma to separate the individual addresses.
7. Click “Next”.
8. Select your fax number. Please note:
The fax function accepts all calls to the selected number,
including telephone calls.
If you would like to take telephone calls at this number,
too, you can set up automatic fax detection.
9. Click “Next” and “Apply”.
The fax function is configured.