Fritz! Box 6490 cable - Configuring Guest Access on the LAN 4 Port

FRITZ!Box 6490 Cable 140
Configuring Guest Access on the LAN 4 Port
Registering a Wireless Device with the Wireless Guest Access
1. Your guest starts the wireless LAN software of her or his
wireless device and searches for the guest network.
2. Your guests authorize themselves using the network key
you assigned.
The wireless LAN connection will be established.
22.2 Configuring Guest Access on the LAN 4 Port
For guests you can configure the network port “LAN 4” as a
guest access.
Features of the LAN Guest Access
• Guests can connect their laptops to the guest access
with a network cable.
• Guest devices can surf the Internet.
• Guest devices have no access to the home network.
• The access profile “Guest” is set for the LAN guest ac-
cess. This access profile can be edited in the “Internet /
Filters” menu on the “Access Profiles” tab.
Configuring Guest Access
Set up the guest access as follows:
1. Open the FRITZ!Box user interface; see page 25.
2. In the “Home Network / Network” menu, select the “Net-
work Settings” page.
3. In the “Guest Access” area, check the box in front of the
“Guest access enabled for LAN 4” option.
4. Click “Apply”.