Do Not Disturb
FRITZ!Box 6490 Cable 107
When Do Not Disturb is switched on, connected telephones
and terminal devices will work in the following way:
• Telephones will not ring.
This is not the case for IP telephones. It is not possible to
set up Do Not Disturb for IP telephones in the FRITZ!Box.
• Fax and answering machines are disabled.
The Do Not Disturb setting has no effect on fax reception
or the answering machines integrated in the FRITZ!Box.
Configuring Do Not Disturb
1. Open the FRITZ!Box user interface; see page 25.
2. Select the “System / Schedule / Do Not Disturb” menu.
3. Enable the “Do Not Disturb enabled” option and define
the time period during which the telephones should not
be able to ring every day.
4. Click “Apply” to save the settings.
Do Not Disturb is now enabled.
Do Not Disturb for a Single Telephone
The Do Not Disturb function for an individual telephone is
configured in the telephone settings.
1. Open the FRITZ!Box user interface; see page 25.
2. Select “Telephony / Telephony Devices”.
3. Click the “Edit” button to open the settings of a tele-
phone:
4. Switch to the “Do Not Disturb” tab and configure the Do
Not Disturb settings.
5. Click “OK” to save the settings.
Do Not Disturb is now enabled.
To Next Page
Loading...
